How to Shut Off the Main Water Supply in a Mobile Home

Are you living in a mobile home and need to know how to shut off the main water supply in Arvada? If so, you’ve come to the perfect place! Everyone should know how to do this simple task, just in case you need to turn off the water in a hurry. Shutting off your mobile home’s main water supply is easy and requires only a few simple tools and this step-by-step guide. Don’t wait until it’s too late – learn how to shut off the main water supply in your mobile home today!

Accessing the Main Water Supply Valve in Arvada

Accessing the main water supply valve is the key to shutting off the main water supply line of your mobile home in Arvada. It’s important to know where this valve is located in order for the process to be successful. Depending on the structure and build of your residence, the water shutoff valve may be located inside or outside of the home.

If you have a manufactured home, then it’s likely that your valve will be installed outside, near where the water supply pipe enters your mobile home. It can be an accessible location as most manufacturers make sure it’s easily reached when repairs or maintenance are needed. On the other hand, for those with pre-fabricated homes, usually found in recreational vehicles, the valve can be placed inside, near to where the pipe comes into contact with the interior wall or floorboard.

It’s best practice to keep track of which type of house you possess so you know where to look when it comes time to shut off your water main. Having familiarity with how to access this valve may seem challenging, but it’s an important step in knowing how to safely and effectively shut off your main water supply, as we’ll explore in our next section.

Also Read About: How to Use a Drain Snake to Clear Clogged Sinks and Showers

Shutting Off the Main Water Supply in Arvada

Now that you have accessed the main water supply valve, you must shut it off. Before doing so, make sure that there are no areas where a leak could be present, which may cause major damage to the inside and outside of your mobile home. Make sure all faucets in the house are turned off and open them to release any pressure that may have built up. Once all potential issues have been addressed, take a look at the state of the valve itself to properly assess whether or not it can be shut off safely. Shutting off a worn-out valve can often cause more problems than it solves, so replacement may be necessary.

Two main scenarios will likely present themselves when attempting to turn off a main water supply valve: either it is already unlocked and simply needs to be closed, or it is locked and needs to be unlocked by turning it clockwise. For the former scenario, turning the handle clockwise until it does not move any further will close the valve entirely and shut off the water flow. 

For the latter scenario, applying a significant amount of force in order to crack through rust and mineral deposits that may have accumulated on its stem can prove difficult unless specialized tools are available. If such tools are not available, using clothespins or wooden wedges as an alternative to hold tension on the stems for extended periods of time can eventually crack these deposits and allow for the easier closure of the valve with more ease.

Once the wall lever or knob has been successfully rotated into place, one should always recheck that no leaks exist and that the handles do not receive any tension when pressure is applied – this means the seal has been successfully set in its place and no pipes should now burst with water even when pumping vigorously through its lines.


Tools and Materials Needed

In order to shut off the main water supply in a mobile home in Arvada, certain tools and materials are necessary. Although having the right items on hand will make the job easier and could prevent any possible problems, it is important to be aware of both sides of the issue while deciding what supplies to use.

On one hand, some may argue that having more of the right tools and materials available can minimize potential issues stemming from shutting off the main water supply, such as floods or property damage. These tools and materials could include slip joint pliers, crescent wrenches, rubber gloves, buckets, towels and blankets. Having supplies such as these on hand would also help facilitate access to pipes, joints and valves during maintenance work and emergencies.

On the other hand, there may be those who maintain that having too many materials on hand may be a waste of money if not used for their intended purpose immediately. If a person has all the items they need but does not have the expertise or experience required to shut off the main water supply, unexpected damage could occur even if precautions are taken. It is recommended that anyone taking on this task has at least a basic understanding of plumbing before proceeding otherwise, call an emergency plumber in Arvada.

How to Shut Off the Main Water Supply?

Now that you are aware of the necessary tools and materials needed to shut off the main water supply in a mobile home, it’s time to consider the steps required to complete the task.

The first step is to locate the main shut-off valve outside of your mobile home. Mobile homes typically have two main valves in Arvada: one is outside near the street, while the other is inside the house near the meter box. A pipe that enters your mobile home will be linked to the exterior valve. Once you’ve located this pipe, turn off both valves by rotating them clockwise as far as possible.

Next, you’ll want to check each interior faucet by running some cold water to ensure that no water is coming out of any of them. After you’ve confirmed that all water has been successfully shut off, open up your main sewer cleanout cap which will release any pressure from the plumbing system in your mobile home. Take caution when opening up this cap as it could release a large amount of water quickly, so make sure that you have something on hand or nearby that can catch any sudden outflow.

Lastly, inspect each faucet again just to be sure that no water is flowing through them. At this point, it should be safe to begin performing repairs or renovations on your plumbing system, requiring no more messing with the water valves whatsoever.


Also Read About: How to Locate & Turn Off Main Water Shut-Off Valves

Alternative Options to Shut Off the Main Water Supply in Arvada

Once you have successfully shut off the main water supply in your mobile home, there are alternative options that you can use to ensure the reliable functionality of your home’s plumbing. 

1) Install a Pressure-reducing Valve

One option is to install a pressure-reducing valve, also known as a pressure regulator valve. This device allows you to control the water pressure of your home in Arvada by regulating the incoming water pressure from the primary shut-off valve. Pressure regulators help reduce damage to pipes and fixtures while ensuring optimal performance. This may be especially beneficial if you live in an area where water pressure levels fluctuate frequently.

2) Utilize a Backflow Preventer

Another method to manage your home’s water supply is to utilize a backflow preventer. Backflow preventers are devices that restrict the flow of water from flowing back into your household plumbing system. This is helpful for protecting against any potentially dangerous contaminants entering through your pipes, such as sewage or chemicals. If installed correctly, a backflow preventer can guard against cross-contamination issues between clean and dirty water lines, providing reliable protection against backed-up water or sewage spills.

3) Installing an Isolation Valve

Finally, you may also consider installing an isolation valve for each device connected to your plumbing system. Isolation valves offer quick shut-off points for any fixture or appliance connected to your home’s plumbing system. They emit a seal when closed, cutting off the cold or hot incoming line, allowing for minimal disruption if minor repairs or maintenance need to be done on a specific device without having to turn off the entire main water supply line.

It is important to consider all of these options before making any decisions as each offers advantages and disadvantages depending on the unique setup of your mobile home’s plumbing system. While additional valves like those discussed here may require more upfront installation costs, they will generally pay dividends through improved reliability in the long run and could prove more cost-effective than constantly turning off and on the main supply line each time repairs are needed.

  • According to a 2017 survey, roughly 64% of Americans living in mobile homes are renters.
  • The average lifespan of a mobile home is 30 years when it is properly maintained.
  • According to a study from 2009, the majority of mobile homes are without access to either public sewer systems (63 percent) or public water supply (70 percent).


In order to ensure the reliable functionality and safety of your mobile home’s plumbing system in Arvada, there are various options available. These include the installation of a pressure-reducing valve, a backflow preventer and isolation valves. Each option offers its own unique advantages and disadvantages, and it is important to consider each before making any decisions. Ultimately, although the upfront installation costs for these valves may be more expensive than simply turning off the main supply line each time repairs are needed, they will generally pay dividends through improved reliability in the long run and could prove to be more cost-effective.

Let us help you upgrade your home’s plumbing system and enjoy the peace of mind that comes with knowing your home is safe and secure. Call us now to get started!

Leave a Reply

Your email address will not be published.

You may use these <abbr title="HyperText Markup Language">HTML</abbr> tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>